1D barcodes, QR, and DataMatrix for traceability

Machine-readable codes only help if they scan reliably after printing, handling, and storage. MARKTECH CIJ, TIJ, and laser platforms can apply 1D barcodes, QR codes, and DataMatrix marks; the right choice depends on code size, substrate, and whether the mark must be permanent.

Where each technology fits

• The H200 Series is a strong starting point for high-resolution carton and label codes — print height 0–25.4 mm per head, resolution up to 600 DPI, and 100 m/min at 150×300 DPI. Graphics and QR codes can be placed with drag-and-drop adjustment.
• Cx400 40 µm CIJ is oriented toward fine 2D codes and microtext on compact surfaces. Cx-series literature cites 140 types of barcodes including QR and DataMatrix.
• Laser marks with the 4005, L2000 fiber, or L3000 UV are appropriate when the code must remain for the life of the part or pack and the material is compatible.

Scan quality in practice

Contrast, module size, and substrate texture matter more than a catalog speed figure. Corrugated cartons, glossy films, and metals behave differently. Share a sample pack, the symbology, and the quiet-zone and size requirements so we can recommend a head, ink or ribbon, or laser process. For shipping marks and case codes, also see the logistics overview.

Variable data

The H200 Series can receive variable data over Ethernet or RS232. Cx-series printers include Ethernet, RS485, and MODBUS-capable I/O. If unique identifiers are required rather than a repeating barcode, see serialization.

Specification checklist

• Symbology — 1D barcode, QR, DataMatrix, or another required type (Cx-series literature cites 140 types of barcodes including QR and DataMatrix)
• Required module or code size, quiet zone, and any contrast standard you must meet
• Substrate — corrugated carton, glossy film, label, or part surface — and a sample if available
• Throughput, and whether the data is static or variable
• If a unique identifier is required rather than a repeating code, treat it as a serialization job and describe the data path

H200 Series print height is 0–25.4 mm per head, with resolution up to 600 DPI and 100 m/min at 150×300 DPI. For shipping marks and case codes, also use the logistics overview. Send the checklist and a sample through the inquiry form.